Features
4*100Mbps POE ports, 2*100Mbps uplink ports
Support 10/100M speed rate, MDI/MDIX and half/full-duplex and auto-negotiation
Each port has complete LED indicator as power indicator, POE indicator, LINK/ACT
VLAN DIP; and 250M long distance transmission
Support IEEE802.d Spanning Tree to make network easier
Support high performance QoS function on each port
Support broadcast storm control
Support 48-56V wide voltage input
Support IEEE802.3x Flow control and Back pressure control
Require no configuration and will instantly operate as soon as you power it up
Default with end-span (1/2+, 3/6-) power supply, Mid-span(4/5+, 7/8-) optional
All port support wire-speed forwarding, 64-1518 Frame can reach wire speed
Support wall mounted installation
Support 4K port lightning protection
Adopt low power consumption chips, stable and reliable
Adopt fanless cooling design, natural cooling
Support POE power supply, support IEEE802.3af and IEEE802.3at, each port can provide up to 30W power supply
The H3B 4EP+2EP ND is hot selling100M POE switch with 2 100M uplinks and 4 10/100Mbps RJ45 POE ports. It’s the internal power version with built in power adapter. We also offer external power type for you to choose. It’s one of the most needed models for short distance POE network environments. It’s designed with VLAN DIP which can help to extend the network distance from the limit of 100 meters to 250 meters.
Highlights
- Extended distance for POE function.
It breaks the limit of original distance for Ethernet cables and extend the transmission distance from 100M to 250M. With 2 uplink ports, it improves the usage efficiency of POE ports. When it comes to the extend mode, the 4 POE ports can only communicate with the uplink ports and they will not be able to communicate with each other. At this time, the NVR and other cascading cables should be connected with the uplink ports.
- Imported POE power chipset.
It’s with high quality imported POE power chipset to ensure stable and high-speed performance. When the POE ports are not connected, it will automatically adjust itself into energy saving mode.
- Compatible with all kinds of network IP cameras.
H3B POE swiches are designed to be used mainly for the security field. So the compatibility of POE switches with all kinds of IP cameras would be a top issue to consider.
- Unique heat dissipation to ensure stable performance.
POE switches are with more power consumption compared with non-POE switches. It’s chipset is also easier to get overheated. So a great heat dissipation solution would be a critical guarantee for POE switches. H3B POE switches adopts 2 side design on the PCB to isolate the inner heating system so as to ensure the stable performance of the inner switching system.
- Support both desktop mounting and wall mounting.
POE switches are designed for security survilliance system. There are 2 options for the mouting ways. We can not only use H3B POE switches as desktop switches, but also use them as wall mounted devices.
Overview
BLY-4EP+2E is a 100M POE Switch with 4 10/100Mbps POE ports, with VLAN DIP it can easily have access to VLAN function. There are 2 10/100MBps uplink port. Longest POE distance can reach 250M. It is designed for school, family, SEMs, small range surveillance and other network connections. All ports support wire speed forwarding and the rate is up to 100Mbps. Each port support 4KV port lightning protection to ensure stable operation.
If you want to know more about 6 port poe switch or switch poe 6 port, please feel free to contact us.
Comments