Features of 5 port gigabit ethernet switch
5*1000M Ethernet ports with auto-negotiation function
Support 1000M speed rate, MDI/MDIX and half/full-duplex with auto-negotiation function
Each port has the complete LED Indicator light
Support single mode single fiber, single mode dual fiber, multi-mode dual fiber and SFP slot
Support IEEE802.1d Spanning Tree
Each port supports wire-speed switching, 64~1518 frame length can reach the wire speed
Support 9216bytes Jumbo packet
Internal 4K MAC Address Entities
Support high performance QoS function on each port
Support multicast to avoid network congestion
Support 5-16V voltage input
Support 4KV port lightning protection
VLAN DIP effectively solve the network congestion and lagging caused by broadcast storm.
Require no configuration and will instantly operate as soon as you power it up
Use low-power consumption chips, only 2.0W in full load conditions
The H3B 5GE is a 10/100/1000Mbps Ethernet Switch hub for FTTD desktop installation. H3B 5GE is with 5 10/100/1000Mbps RJ45 ports; as a switching hub, it shares 1 Ethernet cable with other 4 terminal devices such as computer, router or switch, etc..
As the main connecting devices in a LAN network, Etherent switches are one of the mostly applied network devices. If there are over loaded users, busy APPs and all kinds of servers in your LAN networks, and the network infustructure is never adjusted with the increase of above changes then the performance of the network transmission would be severely affected. The best solution would be the apply of a gigabit desktop Ethernet switch.
The function of switches is totally different under different network environments. It’s also different story between adding new switches under current network environment and replacing current switches with more ports. The point of using switches is to reduce and detect the data flows in the network, if one specific switch has to forward all the packets received under poor deployment, then the other switches will not be able to display their best performance and the transmission speed will also be affected. Except the position of switches, it will also lead to problems if we deploy switches at the locations with small data load and few packets. Under such circumstances, a switch hub would be a perfect solution. When the current network is not very crowded, a switch HUB would be perfect to solve the current network issues.
H3B 5GE is with super small size and nicely designed blue metal case. It can fit in any spaces as it’s super compact. Without extra wiring, it can help to improve your cabinet and desk back to be neat and tidy enough. And as a gigabit switch HUB, it maintains the fast Gigabit transmission speed without any compromise. If you need a small switch HUB and need to connect with less than 5 devices, it would be the perfect choice for you.
Overview of 5 port unmanaged ethernet switch
The BLY-5GE series unmanaged switches are full gigabit switches which are specially designed for high forwarding network environment such as school, family, SMEs and mini monitoring. It has 5 10/100/1000Mbps adaptive Ethernet ports. All ports support wire-speed forwarding and the data rate is up to 1000Mbps. There is lightning protection to ensure smooth and stable operation. Auto MDI/MDIX is also available. No configuration is required, it will instantly operate as soon as you power it up.
Comments