Features of 24 port ethernet switch

24*1000M Ethernet ports

Support 1000M speed rate, MDI/MDIX and half/full-duplex with auto-negotiation function

Each port has the complete LED Indicator light

Each port supports wire-speed forwarding

Support IEEE802.1d Spanning Tree

Support high performance QoS function on each port

Support multicast to avoid network congestion

Support 10K bytes Jumbo packet

Support IEEE802.1Q PORT protocol based on 4K VLAN table

Support 5-16V voltage input

Support 4K lightning protection of each port

Support 1U framework design, easy to install

Require no configuration and will instantly operate as soon as you power it up

Silent designing without fans to reduce power consumption and ensure longtime operation

The H3B 24GE is a 24 port gigabit Ethernet switch with 24 10/100/1000BASE-T Gigabit Ethernet ports. It supports auto MDI/MDI-X function. H3B 24GE is featured with 24 RJ45 10/100/1000Mbps Ethernet ports which ensure high-speed and qualified network connection. It can auto detect and determine the perfect speed of network transmission and also auto detect if half or full duplex mode to apply on the connected devices. With 9K jumbo frame feture, it can manage and transmit huge load of datas quickly and securely.

Stable and Secure Performance

The H3B 24GE provides non-blocking data switching and wire-speed throughput as high as 48Gbps. All those factors greatly help to simplify the network upgrade under the increasing bandwidth demands. All the 24 gigabit Ethernet ports support 10/100/1000Mbps auto negotiation for the speed detection through different types of CAT cables. With auto-MDI/MDI-X function, it can also detect what type of connected is required on the ending equipment. No special crossover cable is required at all.

Strong Data Transmission Processing

By applying the Store-and-Forward forwarding scheme, our H3B 24GE can achieve low latency as well as high speed data transmission. In this way, it can block unnecessary traffic, and congestion can also be efficiently avoided. With strong data transmission ability, H3B 24GE can recognize up to 8K different MAC addresses. It’s 48 Gbps back bandwidth and super large data throughput leads to an ideal solution for most gigabit network. Especially for the network environments which need to be upgraded to gigabit network, our 24 port gigabit Ethernet switch would be a perfect solution with the least to be arranged.

Fanless Design

With its good ventilation fanless design, the H3B 24GE helps to create a silent network environment without any disturbance. It’s definitely a perfect solution to boost your network speed without any influence on the performance.

Overview of 24 port gigabit ethernet switch

The BLY-24GE series unmanaged switches are full gigabit switches which are specially designed for high forwarding network environment such as school, family, SMEs and mini monitoring. It has 24 10/100/1000Mbps adaptive Ethernet ports. All ports support wire-speed forwarding and the data rate is up to 1000Mbps. There is lightning protection to ensure smooth and stable operation. Auto MDI/MDIX is also available. No configuration is required, it will instantly operate as soon as you power it up.

If you want to know more about 24 port gigabit switch price, please feel free to contact us.

Features of switch hub 16 port gigabit

16*1000M Ethernet ports

Support 1000M speed rate,MDI/MDIX and half/full-duplex with auto-negotiation function

Each port has the complete LED Indicator light

Each port supports wire-speed forwarding

Support IEEE802.1d Spanning Tree

Support high performance QoS function on each port

Support multicast to avoid network congestion

Support 10K bytes Jumbo packet

Support IEEE802.1Q PORT protocol based on 4K VLAN table

Support 5-16V voltage input

Support 4K lightning protection of each port

Support 1U framework design,easy to install

Require no configuration and will instantly operate as soon as you power it up

Silent designing without fans to reduce power consumption and ensure longtime operation

The H3B 16GEM is a smaller version for 16GE. 16GE is with 19 inch standard chassis design and 16GEM is a smaller version which is suitable for network installations in a limited space.

Plug and Play

All gigabit Etherent ports are auto-adaptive for the network speed and cabling type automatically.

No matter for 10/100Mbps or 10/100/1000Mbps, it can easily fit into the existing Ethernet network.

Very easy to set up; without any software or complicated configuration.

Individual sront panel LED indicators to display the power status, link speed and link activities.

Reliable and Stable Performance

Non-blocking data transmission; real Gigabit speed. Perfect fast network speed without any compromise.

Compact and solid metal case to ensure long product life.

Fits neatly into small workplaces.

Energy Efficient

It supports the latest Energy Efficient Ethernet (IEEE 802.3az) standard. When no link or traffic is detected on the ports, it will automatically reduce the power consumtion on those ports. When the Ethernet cables connected is less than 100 meters, it will also save energy further. In this way, energy saving can be achieved to the most extent

Suitable for All Types of Networks

Under full duplex mode, each port can deliver up to 2000Mbps of data transmission speed.

Up to 9K packets size jumbo frames.

Industry-leading 3-year long warranty

The H3B SOHO Ethernet Unmanaged Switches provide a convenient and affordable network connectivity to small offices and home/offices. They are easy to use, reliable, and rugged with metal enclosures. Power-over-Ethernet (PoE) support is also available for supplying both power and data across a single CAT-5 ethernet cable to devices such as IP security cameras, VoIP phones, wireless access points, etc. With these Plug-and-Play switches, you can quickly and easily expand your network connections to multiple devices, with no configuration required. With strong technical support there is no need to worry about the performance and after-sales service.

Overview of 16 port network switch

The BLY-16GEM series unmanaged switches are full gigabit switches which are specially designed for high forwarding network environment such as school, family, SMEs and mini monitoring. It has 16 10/100/1000Mbps adaptive Ethernet ports.  All ports support wire-speed forwarding and the data rate is up to 1000Mbps. There is lightning protection to ensure smooth and stable operation. Auto MDI/MDIX is also available. No configuration is required, it will instantly operate as soon as you power it up.

Features of 5 port gigabit ethernet switch

5*1000M Ethernet ports with auto-negotiation function

Support 1000M speed rate, MDI/MDIX and half/full-duplex with auto-negotiation function

Each port has the complete LED Indicator light

Support single mode single fiber, single mode dual fiber, multi-mode dual fiber and SFP slot

Support IEEE802.1d Spanning Tree

Each port supports wire-speed switching, 64~1518 frame length can reach the wire speed

Support 9216bytes Jumbo packet

Internal 4K MAC Address Entities

Support high performance QoS function on each port

Support multicast to avoid network congestion

Support 5-16V voltage input

Support 4KV port lightning protection

VLAN DIP effectively solve the network congestion and lagging caused by broadcast storm.

Require no configuration and will instantly operate as soon as you power it up

Use low-power consumption chips, only 2.0W in full load conditions

The H3B 5GE is a 10/100/1000Mbps Ethernet Switch hub for FTTD desktop installation. H3B 5GE is with 5 10/100/1000Mbps RJ45 ports; as a switching hub, it shares 1 Ethernet cable with other 4 terminal devices such as computer, router or switch, etc..

As the main connecting devices in a LAN network, Etherent switches are one of the mostly applied network devices. If there are over loaded users, busy APPs and all kinds of servers in your LAN networks, and the network infustructure is never adjusted with the increase of above changes then the performance of the network transmission would be severely affected. The best solution would be the apply of a gigabit desktop Ethernet switch.

The function of switches is totally different under different network environments. It’s also different story between adding new switches under current network environment and replacing current switches with more ports. The point of using switches is to reduce and detect the data flows in the network, if one specific switch has to forward all the packets received under poor deployment, then the other switches will not be able to display their best performance and the transmission speed will also be affected. Except the position of switches, it will also lead to problems if we deploy switches at the locations with small data load and few packets. Under such circumstances, a switch hub would be a perfect solution. When the current network is not very crowded, a switch HUB would be perfect to solve the current network issues.

H3B 5GE is with super small size and nicely designed blue metal case. It can fit in any spaces as it’s super compact. Without extra wiring, it can help to improve your cabinet and desk back to be neat and tidy enough. And as a gigabit switch HUB, it maintains the fast Gigabit transmission speed without any compromise. If you need a small switch HUB and need to connect with less than 5 devices, it would be the perfect choice for you.

Overview of 5 port unmanaged ethernet switch

The BLY-5GE series unmanaged switches are full gigabit switches which are specially designed for high forwarding network environment such as school, family, SMEs and mini monitoring. It has 5 10/100/1000Mbps adaptive Ethernet ports. All ports support wire-speed forwarding and the data rate is up to 1000Mbps. There is lightning protection to ensure smooth and stable operation. Auto MDI/MDIX is also available. No configuration is required, it will instantly operate as soon as you power it up.

Features of 16 port ethernet switch

16*1000M Ethernet ports

Support 1000M speed rate,MDI/MDIX and half/full-duplex with auto-negotiation function

Each port has the complete LED Indicator light

Each port supports wire-speed forwarding

Support IEEE802.1d Spanning Tree

Support high performance QoS function on each port

Support multicast to avoid network congestion

Support 10K bytes Jumbo packet

Support IEEE802.1Q PORT protocol based on 4K VLAN table

Support 5-16V voltage input

Support 4K lightning protection of each port

Support 1U framework design,easy to install

Require no configuration and will instantly operate as soon as you power it up

Silent designing without fans to reduce power consumption and ensure longtime operation

The H3B 16GE is a 10/100/1000Mbps Ethernet Switch hub which is ideal for SOHO Networks installation. H3B 16GE is with 16 10/100/1000Mbps RJ45 ports with standard chassis design of 19 inches.

The H3B 16GE Gigabit Ethernet Switch offers you with a high-performance, low-cost, easy-to-use option to upgrade your network into 1000M gigabit with faster speed from the original 100M networks. All the 16 Ethernet ports support auto MDI/MDIX. It’s designed to be plug and play, without worring about the cable types. Moreover, with the IEEE802.3az Energy Efficient Ethernet technology, H3B 16GE can save up to 20% of the total power consumption, compared with the older generation switch designs.

H3B 16 GE is an ideal way to boost your network speed. With 16 10/100/1000Mbps auto-adaptive ports, it can automatically detect optimal network speeds. It can also achieve the extreme throughput with a big back bandwidth of 32 Gbps.

Why the H3B Gigabit Ethernet Switch is ideal for SOHO Networks?

Stable Performance

High Quality as well as Reliability

Compact and solid metal case design

Fanless design which leads to silent and energy-efficient operation

3 years Warranty and lifetime online support

Energy-efficient technology for less power consumption

Auto-MDI/MDIX functions; without crossover wiring

Wire speed non-blocking switching performance for maximum network throughput

For all RJ45 ports, auto-negotiation work at the highest common speed between switch and ending equipment

Desktop, wall-mount and rack-mount are all optional

ETHERNET PORT CONFIGURATION: 16 Gigabit auto-adaptive Ethernet RJ45ports

PLUG AND PLAY: No software or configuration is needed; it’s very simple to set up, even for first learners.

VERSATILE MOUNTING OPTIONS: Supports desktop, wall mounting and rack mounting.

SILENT OPERATION: Fanless design with no extra noise; perfect solution for noise sensitive applications.

LONG TERM WARRANTY SUPPORT: 3 years warranty, leading guarantee in the industry.

ENERGY SAVING: Power consumtion saving to the lowest extent; H3B switch series are compliant with IEEE802.3az Energy Efficient Ethernet standards.

Overview of 16 port gigabit ethernet switch

The BLY-16GE series unmanaged switches are full gigabit switches which are specially designed for high forwarding network environment such as school, family, SMEs and mini monitoring. It has 16 10/100/1000Mbps adaptive Ethernet ports.  All ports support wire-speed forwarding and the data rate is up to 1000Mbps. There is lightning protection to ensure smooth and stable operation. Auto MDI/MDIX is also available. No configuration is required, it will instantly operate as soon as you power it up.

If you want to know more about 16 port gigabit switch price, please feel free to contact us.

Features of 10 port poe switch

 8*100Mbps POE ports, 2*100Mbps uplink ports

 Support 10/100M speed rate, MDI/MDIX and half/full-duplex and auto-negotiation

 Each port has complete LED indicator as power indicator, POE indicator, LINK/ACT

 VLAN DIP; and 250M long distance transmission

 Support IEEE802.d Spanning Tree to make network easier

 Support high performance QoS function on each port

 Support broadcast storm control

 Support 48-56V wide voltage input

 Support IEEE802.3x Flow control and Back pressure control

 Require no configuration and will instantly operate as soon as you power it up

 Default with end-span (1/2+, 3/6-) power supply, Mid-span(4/5+, 7/8-) optional

 All port support wire-speed forwarding, 64-1518 Frame can reach wire speed

 Support wall mounted installation

 Support 4K port lightning protection

 Adopt low power consumption chips, stable and reliable

 Adopt fanless cooling design, natural cooling

 Support POE power supply, support IEEE802.3af and IEEE802.3at, each port can provide up to 30W power supply

The H3B 8EP+2EP ND is hot selling100M POE switch with 2 100M uplinks and 8  10/100Mbps RJ45 POE ports. It’s the internal power version with built in power adapter. We also offer external power type for you to choose. It’s one of the most needed models for short distance POE network environments. With VLAN DIP it can easily help to extend your network distance from the limit of 100 meters to 250 meters.

With the rapid development of POE technology, it’s applied in more network applications for IP cameras, IP phones, wireless bridges, Bluetooth access points, LED lights, printers, building security systems, etc. After applying POE switches to the current networks, 48V DC power supply can be easily accessed for above devices on the basis of current Ethernet cabling. All of those lead to the deduction of total construction costs.

H3B 8EP + 2E ND is designed with strong data processing ability to ensure stable functioning. H3B POE switches is processing datas by store and forward. By using big buffer switching chipsets, all ports support wire speed data forwarding to meet the demands of big flow. Due to the 1.6Gbps big back bandwidth, it sufficiently meets the demand of full-speed wire transfer needs of all the 8 POE ports.

H3B 8EP + 2E ND is compatible with most network IP cameras in the market. First of all, H3B POE switches are designed with IEEE802.3AF/AT protocols and industry leading end span powering system, which can effectively reduce at least 50% of the cabling loss. End span offers more power and can drive longer distance, which perfectly meets the POE needs of most IP cameras in the market.

As for the data procession ability, H3B 8EP + 2E ND will also not let you down. Security survilliance sets very high requirements for the throughput and latency. The fluency and stability are both critical elements for video transmission. And H3B POE switches would help you to reach those goals.

Overview of switch poe 10 port

BLY-8EP+2E is a 100M POE Switch with 8 10/100Mbps POE ports, with VLAN DIP it can easily have access to VLAN function. There are 2 10/100MBps uplink port. Longest POE distance can reach 250M. It is designed for school, family, SEMs, small range surveillance and other network connections. All ports support wire speed forwarding and the rate is up to 100Mbps. Each port support 4KV port lightning protection to ensure stable operation.

Features

 4*100Mbps POE ports, 2*100Mbps uplink ports

 Support 10/100M speed rate, MDI/MDIX and half/full-duplex and auto-negotiation

 Each port has complete LED indicator as power indicator, POE indicator, LINK/ACT

 VLAN DIP; and 250M long distance transmission

 Support IEEE802.d Spanning Tree to make network easier

 Support high performance QoS function on each port

 Support broadcast storm control

 Support 48-56V wide voltage input

 Support IEEE802.3x Flow control and Back pressure control

 Require no configuration and will instantly operate as soon as you power it up

 Default with end-span (1/2+, 3/6-) power supply, Mid-span(4/5+, 7/8-) optional

 All port support wire-speed forwarding, 64-1518 Frame can reach wire speed

 Support wall mounted installation

 Support 4K port lightning protection

 Adopt low power consumption chips, stable and reliable

 Adopt fanless cooling design, natural cooling

Support POE power supply, support IEEE802.3af and IEEE802.3at, each port can provide up to 30W power supply

The H3B 4EP+2EP ND is hot selling100M POE switch with 2 100M uplinks and 4  10/100Mbps RJ45 POE ports. It’s the internal power version with built in power adapter. We also offer external power type for you to choose. It’s one of the most needed models for short distance POE network environments. It’s designed with VLAN DIP which can help to extend the network distance from the limit of 100 meters to 250 meters.

Highlights

1. Extended distance for POE function.

It breaks the limit of original distance for Ethernet cables and extend the transmission distance from 100M to 250M. With 2 uplink ports, it improves the usage efficiency of POE ports. When it comes to the extend mode, the 4 POE ports can only communicate with the uplink ports and they will not be able to communicate with each other. At this time, the NVR and other cascading cables should be connected with the uplink ports.

2. Imported POE power chipset.

It’s with high quality imported POE power chipset to ensure stable and high-speed performance. When the POE ports are not connected, it will automatically adjust itself into energy saving mode.

3. Compatible with all kinds of network IP cameras.

H3B POE swiches are designed to be used mainly for the security field. So the compatibility of POE switches with all kinds of IP cameras would be a top issue to consider.

4. Unique heat dissipation to ensure stable performance.

POE switches are with more power consumption compared with non-POE switches. It’s chipset is also easier to get overheated. So a great heat dissipation solution would be a critical guarantee for POE switches. H3B POE switches adopts 2 side design on the PCB to isolate the inner heating system so as to ensure the stable performance of the inner switching system.

5. Support both desktop mounting and wall mounting.

POE switches are designed for security survilliance system. There are 2 options for the mouting ways. We can not only use H3B POE switches as desktop switches, but also use them as wall mounted devices.

Overview

BLY-4EP+2E is a 100M POE Switch with 4 10/100Mbps POE ports, with VLAN DIP it can easily have access to VLAN function. There are 2 10/100MBps uplink port. Longest POE distance can reach 250M. It is designed for school, family, SEMs, small range surveillance and other network connections. All ports support wire speed forwarding and the rate is up to 100Mbps. Each port support 4KV port lightning protection to ensure stable operation.

If you want to know more about 6 port poe switch or switch poe 6 port, please feel free to contact us.

Features of 5 port poe powered switch

 4*100Mbps POE ports, 1*100Mbps uplink port

 Support 10/100M speed rate, MDI/MDIX and half/full-duplex and auto-negotiation function

 Each port has complete LED indicator as power indicator, POE indicator, LINK/ACT indicator

 Support IEEE802.d Spanning Tree to make network easier

 Support high performance QoS function on each port

 Support broadcast storm control

 Support 48-56V wide voltage input

 Support IEEE802.3x Flow control and Back pressure control

 Require no configuration and will instantly operate as soon as you power it up

 Default with end-span (1/2+, 3/6-) power supply,Mid-span(4/5+, 7/8-) optional

 All port support wire-speed forwarding, 64-1518 Frame can reach wire speed

 Support wall mounted installation

 Support 4K port lightning protection

 Adopt low power consumption chips,stable and reliable

 Adopt fanless cooling design, natural cooling

 Support POE power supply, support IEEE802.3af and IEEE802.3at, each port can provide up to 30W power supply

The H3B 5FEP is 100M POE switch with 5 10/100Mbps RJ45 POE ports. We also offer all ports gigabit for higher speed demand networks. It’s suitable for the network which does not require network transmission at long distance range.

H3B 5FEP is a POE network switch designed for IP cameras, NVR, IP phone, and wifi access point and other devices. According to the needs of security survilliance, it’s with high speed forwarding ability and big enough back bandwidth to ensure clear image transmission and fast video transmission without latency.

How to choose POE switches?

1. How many power is needed for the PD?

There are different POE standards with different output power. For example, as for IEEE802.3af, max output power for each port is 15.4W. As there is loss for the transmitting cables, it can power for PD within 12.95W power limit. For 48V standard POE switches which comlies with IEEE802.3at, it can power for PD within 25W power limit.

2. How many devices need to be powered?

There is a critical parameter for POE switches, which is the total power budget. Under IEEE802.3AF, for example, if a 24 port POE switch is with 370W power budget, then it can provide enough power for 24 ports. But if it’s under IEEE802.3AT with 30W per port, it will only be enough to power for 12 ports.

3. Specifications for the ports of switch.

First of all, we need to decide on the transmission rate. Then we will know if we need a 100M or 1000M POE switch. Secondly, we need to make sure if fiber port is needed for the network construction. If yes, then we have to choose fiber optic POE switches with more parameters to consider. If not, then it would be much easier, network POE switches would just be enough. What’s more, also need to consider if management function is required.

Overview

BLY-5FEP is a 100M POE Switch with 4 POE ports and 1 uplink port. It is designed for school, family, SEMs and mini monitoring. All ports support wire speed forwarding and the rate is up to 100Mbps. Each port support 4KV port lightning protection to ensure stable operation. All ports support MDI/MDIX function. No configuration is required, it will instantly operate as soon as you power it up.

Features

 Support the switch between 100Base-TX and 100Base-FX

 1*155Mbps full-duplex fiber port and 1*100M Ethernet port

 Each port has the complete LED Indicator light for installation, commissioning and maintenance

 Support 9K Jumbo Packet

 Support direct forwarding mode, less time delay

 Less power consumption, only 1.5W in full load condition

 Support isolation protection function, good data security

 Small size, suitable for installation in various places

 Adopt low power consumption chips to ensure longtime and stable operation

The H3B 1F1EP is 100M fiber to ethernet converter with poe. POE media converters converts between copper and fiber while providing power over Ethernet to ending devices connected. Those devices include IP cameras, IP phones, routers or access points. POE media converters and switches are defined as Power Sourcing Equipment(PSE). Basically speaking, poe powered fiber converter is a combination of fiber to Ethernet media converter and POE injector. It’s like both devices in the same equipment.

Power-over-Ethernet (PoE) technology (including PoE+) provides power for the ending equipments. It supplies both power and data over copper cables. The technology enables the powering of ending equipments without any influence on the data transmission. Poe technology enables both power supply and data transmission on the same cable. Thus, there is no need for any extra cabling for the IP cameras, IP phones, routers or access points.

Media converters are developed to extend the data transmission distance by converting between Ethernet signal and optical signal. By the transition from copper cables to fiber optic cables it can extend the transmission distance to be 120KM at most. POE media converters provide all the advantages of POE and at the same time it plays the best of fiber optic cablings. H3B 1F1EP is a 100M poe to ethernet converter with 1 fiber ports and 1 RJ45 POE port. We offer both single mode and multi mode. For single mode, there is also single fiber and dual fiber. And it covers distance from 20KM to 120KM.

With the same size as normal non-POE media converters, H3B POE media converters are with compact size which is suitable for all kinds of network environments. We focus on 48V standard POE devices which can detect before the power supply. It’s standard and smart POE, without any risk to burn the ending devices. So welcome to test our H3B POE media converters.

Overview

The BLY-1F1EP is a 10/100Mbps adaptive media converter. It can transfer 100Base-TX of electrical signals to 100Base-FX of optical signals. It can extend the transmission distance from 100m to 120km via copper cables. There are also many other advantages such as isolation protection, good data security, working stability and easy maintenance.

If you want to know more about poe media converter price, please feel free to contact us.

What Is POE Switch?

Briefly, the switch ethernet poe is a kind of network switch with a built-in injection of Power over Ethernet. First of all, let’s get to start with the switch. A switch is a telecommunication device using in a wired network to be connected with other devices through Ethernet cables. In this way, the switch creates a path for all connected devices to be able to talk with each other. In wireless-based networks, switches are not used because they can communicate directly with each other. Except above basic functions, smart POE switches can deliver network power to a range of devices except for basic data transmission. Basically speaking, Power over Ethernet (POE) is a technology that lets network cables carry electrical power. H3B Power Over Ethernet solution complies with the IEEE Power over Ethernet standards.

H3B power-over-Ethernet (PoE) solution is designed to supply both power supply and data transmission across a single CAT-5/6 Ethernet cable to ending equipment such as IP cameras, VoIP phones, wireless access points, etc. Under the help of these poe network switch for ip cameras, without any configuration, customers can easily set up and expand the network connection to different network devices. With POE powered network switch, it also helps to save the trouble and cost to install extra power sockets for the ending equipment.

Why Need ethernet switch powered by poe?

Long reach POE solution brings lots of advantages to installation, here are some highlights.

Time and money-saving. The network cables of Ethernet POE injector does not require any special wiring from qualified electricians. Also, there is no need to install any extra power sockets for the connected devices. In this way, it helps to reduce lots of time and expenses.

Flexibility. Without the need to follow certain electrical outlets, POE network switch for IP cameras makes your project easier. End devices such as IP cameras and wires access points can be installed at the places needed the most. And they can also be relocated easily; no need to worry about any wiring or installation limitations.

Safety. H3B POE solutions are designed with intelligent detection before the power supply. They are specially designed to protect the ending devices from burning.

Reliability. The POE power comes from universally compatible sources through the Ethernet cables, rather than some wall-mounted sockets with different power collection standards.

Scalability, ethernet poe injector available with stable power supply from the network spares the work and worry of installation and distribution, which is just simple and effective for all parts.

Where Do We Need POE Network Switch?

The H3B POE series switches provide convenient and affordable network connectivity for many applications. With considerate design and reliable performance, POE powered network switch is easy to use and convenient to maintain.

POE has a wide range of applications, here are 3 mainly applied devices.

VoIP phones. As the original POE application, it's like the old analog systems.

IP cameras. POE is now commonly used on all kinds of networked surveillance cameras. It's very fast to finish deployment without worrying about the power problem, and if need to be repositioned it can also be achieved easily.

Wireless access points – All kinds of Wifi and Bluetooth APs and RFID readers in the market are commonly designed PoE-compatible.

Want cheap POE switch? Huabo Group can provide you with the best solution. Please feel free to contact us.

POE Extender-The Smart Solution for Covering Distances

As we all know, Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When a longer transmission distance is needed, we normally use fiber cables to extend the transmission distance. However, sometimes we do not have the budget or space for fiber wiring. To overcome the Ethernet cable distance limit, we can simply apply with a poe network extender. It can help extend a certain distance with CAT-5e or CAT-6 cables. After using POE extenders, the connection distance in total for the Ethernet cables can be as long as 400 meters. Besides, it's very easy to use and also with competitive prices. For applications not suitable or affordable on fiber solutions, it can help solve the problem easily and effectively.

POE Extender has the following main features:

1.Extends a POE connection beyond the limit of 100 meters

2. It's IEEE802.3af and 802.3at compliance

3.Super easy for installation; without any additional power supply

4.With wide compatibility to most POE products in the market.

5.Mainly for indoor use.

How are the H3B POE Ethernet Extender Deployed?

Switch > PoE transmitting device > PoE receiving device > IP powered device

Detailed steps are as follow:

1. Connect the switch and POE transmitting device through fiber cables

2. Connect the "To RX" port on the POE extender to the "To TX" port in the PoE receiving device through RJ45 cable

3. Connect the "To IP device" port on the POE extenders to the ending IP device that needs to be powered.

Why H3B Power Over Ethernet Extender?

H3B PoE Extender delivers 100 Mbps, full-duplex data rate. Our best poe extender can be installed easily into an existing installation as it's compatible with both POE and non-POE switches in the market. It’s designed to extend POE over the standard of 100 meters. For many building applications that require more than 100 meters Ethernet distance, H3B POE extender can play a very important role to extend the limited distance. H3B POE extender is an easy and cheap solution for many application scenarios as to power IP cameras, access card readers by providing power plus data to up to 4 IP devices under 1 Ethernet cable.