A Family-friendly Christian Faith-based Social Media Network for Everyone!
Magnesia bricks description
Magnesia bricks, also known as magnesia carbon bricks, are a kind of alkalescency refractory bricks that made from the sintered magnesium with its content of 87%-97% and that are combined with silicate. Since its combination composition is mainly CMS-M2S system, its Load softening temperature is low and thermal shock resistance is poor that determine its application is few. But magnesia bricks are widely used in the furnaces and kilns that have alkaline atmosphere. Magnesia carbon bricks properties depend on the nature of the raw materials, the mineral composition, microstructure and closely on the density of the products.
According to the physical and chemical index, there are two grades of Magnesia bricks we can provide. The alumina magnesia carbon bricks are one of the important products.
Magnesia bricks technical index
Index MG-92 MG-95 MG-97 MG-98
MgO % ≥ 92 95 97 98
CaO % ≤ 2 1.7 1.3 1.2
SiO2 % ≤ 1.2 1 0.7 0.6
Fe2O3 % ≤ 1.2 1 0.8 0.5
Bulk Density≥ g/cm3 2.9 2.95 2.95 3
A.P. % ≤ 16 16 16 15
C.C.S (Mpa) ≥ 60 70 70 80
Magnesia bricks application
The products have the properties of bearing high temperature, high refractoriness under load and good resistance to alkali. They are widely used in the basic zone of metallurgical furnaces, nonferrous furnaces and regenerator of glass furnaces.
Magnesia bricks package
Products are packed on wooden pallet and then polyethylene film is placed over it, finally the package is tied up with steel strips.