Anna Zhao's Blog (29)

What is CSA Cement

CSA(Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. CSA cement is short for Calcium Sulfoaluminate Cement, also named rapid setting cement, high strength cement, fast hardening cement, CSA type III and CSA binder.…

Diatomite brick is a kind of Clay Insulation brick. Thermal Insulation Bricks are high porosity refractories with low thermal conductivity and high porosity (no less than 45%) used to reduce heat losses and thus to maximize heat conservation within the furnace.

Clay Insulation brick Characteristics

●High porosity

●Low volume density

●Low Thermal conductivity

Clay…

Description of Calcium aluminate cement

Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The product obtained after cooling is a hard mineral: calcium aluminate clinker. Ground into a fine powder, the clinker becomes calcium aluminate cement (CAC) which forms a paste when mixed with water. This has the ability to harden very quickly: it…

Calcined Bauxite Introduction

Calcined Bauxite manufacturers produce Calcined Bauxite by firing (heating) the superior grade Bauxite at high temperature (from 850℃ to 1600℃). This removes moisture thereby increasing the alumina content. Compared to an alumina content of about 57 % to 58 % in raw Bauxite, Calcined Bauxite has an alumina content of 75 % to 90 %. The heating is carried out in…

Description of Calcium aluminate cement

Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The product obtained after cooling is a hard mineral: calcium aluminate clinker. Ground into a fine powder, the clinker becomes calcium aluminate cement (CAC) which forms a paste when mixed with water. This has the ability to harden very quickly: it…

Refractory products fall into two categories: brick or fired shapes, and specialties or monolithic refractories. Refractory linings are made from these brick and shapes, or from specialties such as plastics, castables, gunning mixes or ramming mixes, or from a combination of both.

Oreworld Trade (Tangshan) Co. is a professional refractory supplier in Tangshan City, China's. Our major products are basic refractory bricks, insulating bricks,  refractory mortars, high alumina brick,…